高清范

百度 论坛搜索
东家
跳转到指定楼层
发表于 2019-4-15 15:58 | 只看该作者 |只看大图 回帖奖励 |倒序浏览 |阅读模式
终端连接走字说明TTL链接没有问题
报的错误是:
串口已经连接,请给单板上电,若已经上电,请断电后重新上电。
Timeout error.

Bootrom start
Boot Media: eMMC (Default Speed)
Decrypt auxiliary code ...OK
Enter boot auxiliary code

Auxiliary code - v1.00
DDR code - V1.1.2.1 20171011
Build: May 11 2018 - 19:12:57

Reg Version:  v1.5.2\
Reg Time:     2018/08/01 16:39:44
Reg Name:     hi3798m31dms1_hi3798mv310_DDR3-1866_1GB_16bitx2_2layers.re5

Set cpu freq

Boot auxiliary code success
Bootrom success


System startup


Relocate Boot

Jump to C code


Fastboot 3.3.0 (taodonghui@HW-TV-S7) (Oct 30 2018 - 16:34:40)


MMC/SD controller initialization.
scan edges:2 p2f:1 f2p:3
mix set temp-phase 0
scan elemnts: startp:45 endp:44
Tuning SampleClock. mix set phase:[00/03] ele:[08/18]

SDK Version: HiSTBAndroidV600R003C01SPC031_v2018060410


mmc_capacity: 0x1d2000000

Begin to show boot logo through Logo_Main.
DispParam0.format:14, DispParam1.format:0#2
HMT_read_bootlogo_count, bootlogo_count=0
HMT_write_bootlogo_count, bootlogo_count=1
Flash write result:0x800
hotplug = 1
Logo_Main End.
up

SET BIT(40,0)==>x3

======== HMT_IR_getKey start Second ========
get key value 0x0  g_Left_KeyDown=0   g_Right_KeyDown=0
check remote recovery button begin
HI_Android_Authenticate,123: secure chip flag = 0
enter write OTP mode!
env bootcmd:mmc read 0 0x1FFBFC0 0x3D000 0x5800; bootm 0x1FFBFC0

MMC read: dev # 0, block # 249856, count 22528 ... 22528 blocks read: OK

88071672 Bytes/s
Check Hisilicon_ADVCA ...
Not hisilicon ADVCA image ...
Check Hisilicon_ADVCA ...
Not hisilicon ADVCA image ...

Found Initrd at 0x04000000 (Size 346137 Bytes), align at 16384 Bytes

## Booting kernel from Legacy Image at 01ffffc0 ...
   Image Name:   Linux-3.18.24_hi3798mv310
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    7455255 Bytes = 7.1 MiB
   Load Address: 02000000
   Entry Point:  02000000
HMT_write_bootlogo_count, bootlogo_count=0
Flash write result:0x800
   XIP Kernel Image ... OK
OK
append_ctc:153 enter
mmc_size:7456, bytesBFUsrData=2382
new bootargs:blkdevparts=mmcblk0:1M(fastboot),4M(bootargs),50M(recovery),1M(deviceinfo),4M(baseparam),8M(logo),16M(fastplay),8M(misc),30M(factory),50M(kernel),2M(sysinfo),8M(iptv_data),50M(trustedcore),50M(securestore),500M(backup),500M(cache),1000M(system),100M(appdata),4786M(userdata),-(telepart)
ATAGS [0x00000100 - 0x000004C8], 968Bytes

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
hi_eth: hieth_mdiobus_read,73:mdio busy
hi_eth: no dev probed!
init: /init.bigfish.rc: 48: invalid command 'getprop'
init: /init.bigfish.rc: 113: invalid option 'sdcard_r'
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
init: read misc boot info 1088/1088 bytes.
init: mount system image fail 0 times.
init: init: /system/bin/e2fsck
init: init: -v
init: init: -f
init: init: -y
init: init: /dev/block/mmcblk0p19
init: init: result is 256
init: not found file and directiry in customer path
init: property 'ro.hw.sys.zroid.path' doesn't exist while expanding '${ro.hw.sys.zroid.path}etc/init.thirdos.rc'
init: cannot expand '${ro.hw.sys.zroid.path}etc/init.thirdos.rc' while assigning to 'hmt_import'
init: property 'ro.hw.sys.zroid.path' doesn't exist while expanding '${ro.hw.sys.zroid.path}bin'
init: cannot expand '${ro.hw.sys.zroid.path}bin' while assigning to 'hmt_export'
init: property 'ro.hw.sys.zroid.path' doesn't exist while expanding '${ro.hw.sys.zroid.path}lib'
init: cannot expand '${ro.hw.sys.zroid.path}lib' while assigning to 'hmt_export'
init: /dev/hw_random not found
init: cmdline buffer=console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),4M(bootargs),50M(recovery),1M(deviceinfo),4M(baseparam),8M(logo),16M(fastplay),8M(misc),30M(factory),50M(kernel),2M(sysinfo),8M(iptv_data),50M(trustedcore),50M(securestore),500M(backup),500M(cache),1000M(system),100M(appdata),4786M(userdata),-(telepart) initrd=0x4000000,0x54819 quiet fci=228d427 futc=1540888478 mem=1G mmz=ddr,0,0,36M SZ_DDR=0x40000000
size = 410
healthd: wakealarm_init: timerfd_create failed
init: cannot find '/system/bin/rild', disabling 'ril-daemon'
healthd: No charger supplies found
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/bin/basicService', disabling 'basicService'
init: cannot find '/system/bin/ontattr', disabling 'ontattr'
init: cannot find '/system/bin/frontPanel', disabling 'frontPanel'
init: cannot find '/system/bin/mtkbt', disabling 'blueangel'
init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
init: cannot find '/system/bin/skyplayserver', disabling 'skyplayserver'
init: cannot find '/system/bin/dlnaserver', disabling 'dlnaserver'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
Bootrom start发送头帧失败,可能的原因如下:
1.烧写的Fastboot镜像与当前单板型号或Flash不匹配导致;
2.单板DDR有问题,无法正常进行DDR初始化操作;
3.如果是安全芯片,则需要确认是否需要使用programmer来进行烧写(Conax,Verimatrix高安类型必选);
4.如果是安全芯片,则需要确认当前镜像是否已经签名且签名正确,注意签名使用的key必须与芯片启动校验的key一致;
Failed to send type frame.
Failed to download fastboot!

2345截图20190415155429.png (121.01 KB, 下载次数: 0)

2345截图20190415155429.png

2345截图20190415155449.png (118.14 KB, 下载次数: 0)

2345截图20190415155449.png
分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏 分享分享 支持支持 反对反对

使用高级回帖 (可批量传图、插入视频等)快速回复

您需要登录后才可以回帖 登录 | 注册加范币

本版积分规则   Ctrl + Enter 快速发布  

发帖时请遵守我国法律,网站会将有关你发帖内容、时间以及发帖IP地址等记录保留,只要接到合法请求,即会将信息提供给有关政府机构。
快速回复 返回顶部 返回列表